No. 451, Jiuhua Avenue, Jiuhua Town, Rugao City, Jiangsu Province

All Categories
Call Us

+86 13861981388

Send us a Mail

13861981388@163.com

Products

Home >> Products >> Graphite Heat Exchanger

YKC type round block hole graphite heat exchanger

This series is sealed by PTFE seals between the graphite upper (lower) head and the graphite heat exchange block, and a pressure spring is used as an automatic compensation device for thermal expansion and contraction The graphite heat exchange block is...
Description:

Structure and Features:

This series is sealed by PTFE seals between the graphite upper (lower) head and the graphite heat exchange block, and a pressure spring is used as an automatic compensation device for thermal expansion and contraction. The graphite heat exchange block is drilled with a plurality of groups of vertically intersecting and non-communicating holes for the circulation of different fluids, and the partition heat exchange is carried out to achieve the purpose of heat exchange. It has the characteristics of high heat transfer efficiency, high structural strength, strong impact resistance, long service life and convenient maintenance.

Technical parameters:

Technical Features

Portrait

Landscape

allowable pressure MPa

0.4

0.4

Allowable temperature ℃

-20-170

170

Technical Standards:

Refer to HG/T3113-1998

Main Application:

This series of products can be used as heater, cooler and condenser. When used as condenser, gas-liquid separator should be installed.

Equipment Avantages::

In addition to the advantages of YKA series, there are the following characteristics:

1. Graphite heat exchange block has no center hole, water hole from one side through the other side, material hole is full of heat exchange block, improve material utilization rate;

2.Graphite block has only one outer ring sealing face, while YKA series has two inner and outer ring sealing face, which is easy to produce sealing failure, greatly convenient for processing and maintenance;

3.The equipment with the same heat exchange area is smaller and more compact than YKA;

4.Equipment with larger specifications can be manufactured;

5.It can be designed for multi-flow, vertical and horizontal state.

Inquiry
WhatsApp Directly